News

FromDual has the pleasure to announce the release of the new version 2.2.3 of its popular Backup and Recovery Manager for MariaDB and MySQL (brman).

The new FromDual Backup and Recovery Manager can be downloaded from here. The FromDual Repositories were updated. How to install and use the Backup and Recovery Manager is described in FromDual Backup and Recovery Manager (brman) installation guide.

In the inconceivable case that you find a bug in the FromDual Backup and Recovery Manager please report it to the …

Table of Contents

• How to make MariaDB Pull Replication as secure as possible
• MariaDB Push Replication
• Pushing data with the FederatedX Storage Engine and Triggers
• Traffic mirroring with MariaDB MaxScale or ProxySQL

How to make MariaDB Pull Replication as secure as possible

A normal MariaDB Replication is a Pull Replication. This means that a Slave connects to its Master and gathers or better requests Binary Log information from the Master and applies them in a streaming way.

In some set-ups the Slave is …

We recently had the situation that a customer complained about the Oom killer terminating the MariaDB database instance from time to time. The MariaDB database configuration was sized quit OK (about 50% of RAM was used for the database) but they did not have swap configured.

When we checked the memory for the specific mysqld process we found that VSZ was about 80 Gibyte (on a 64 Gibyte machine) and the RSS size was about 42 Gibyte. The very high VSZ value in combination with a lacking swap space and Oom …

An inside view from the MariaDB database instance can be received with:

SQL> SHOW GLOBAL STATUS LIKE 'memory_used';
+---------------+------------+
| Variable_name | Value      |
+---------------+------------+
| Memory_used   | 3235456112 |
+---------------+------------+

Here the memory is listed as released when the TRUCATE TABLE is done.

I just got a note from Markus Makela with the following suggestion:

You could try and see if the mirror router from the experimental module package would work as a substitute for this.

Recently we had the case that a customer claimed that MariaDB 10.3 Binary Log is using 150% more space on disk than MySQL 5.7 Binary Log. Because I never observed something similar, but to be honest, I did not look to intensively for this situation, we had to do some clarifications.

First we checked the usual variables which could be candidates for such a behaviour:

binlog_format                = ROW
binlog_row_image             = FULL
binlog_rows_query_log_events = OFF   # MySQL only …

Because we conduct many customers in MariaDB Galera Cluster upgrades and because these customers sometimes have pretty old MariaDB Galera Cluster set-ups I think it is good to have a rough MariaDB Galera Cluster Upgrade Path.

For an Upgrade Path we have to consider a few things:

• We face different MariaDB Galera Cluster version (5.5, 10.0, 10.1, 10.2, 10.3, 10.4, 10.5 and soon 10.6).
• We face different Galera plug-in versions (v2, v3 and v4). Direct upgrade from v2 to v4 is not possible. Upgrade from latest …

Hi Oli,

I think that it could be worth mentioning that in MariaDB 10.5, the described problem should no longer exist, thanks to https://jira.mariadb.org/browse/MDEV-19747 removing the code. Also, in older MariaDB versions, https://jira.mariadb.org/browse/MDEV-23720 disables the feature by default.

I must confess that omitting the redo logging was my suggestion. Unfortunately, no proper benchmarking was conducted before it was implemented in MySQL 5.7. With a reasonable innodb_log_file_size, …

InnoDB tries to keep pages in Buffer Pool to be fast. If a page is changed by a DML statement (INSERT, UPDATE, DELETE) this change will be done in InnoDB Buffer Pool and not directly on disk. But those changed InnoDB pages residing in InnoDB Buffer Pool must be flushed sooner or later to disk to become persistent. This is done by the InnoDB background writer thread(s) (default 4).

InnoDB flushes the dirty pages with a pace of innodb_io_capactiy (default 200) pages/s. This variable should be set depending on …

Because upgrading from MariaDB 10.4 to MariaDB 10.5 (non-clustered) seems not to be a problem
[ 1
] we take the challenge and try to create a receipt based on the MariaDB 10.3 to MariaDB 10.4 Galera Cluster upgrade documentation
[ 3
]:

Before you start

Before you begin with the upgrade you should consider a few things:

• Downgrade is officially not supported!
  [ 4
  ] It might work, or not.
• So you should have taken a proper an clean backup before you start with the upgrade and you should be sure the restore …

In my former Blog Post Partial Table or Schema restore from mariabackup full backup we worked out the basics of a partial restore of a table into a MariaDB database instance.

An now we use this know-how to try the same procedure on a Galera Cluster.

The backup is done in the exact same way as described in the mentioned article. We can even use the backup made there.

For the restore we use the following procedure:

Prepare and Restore a table

# BACKUPDIR="/home/mysql/bck/qamariadb105/daily"
# …

For me it was for a long time not clear if a mariadb-backup full backup can be used to do partial table or schema restores. Now we faced this challenge with a customer. So time to try it out…

This test was made with MariaDB 10.5.5. So it may not work with some older MariaDB releases…

Backup

Because I do not know during the backup if I need a full or a partial restore I always want to do a full mariadb-backup backup!

The full backup can be done as normal but the prepare should not be done yet …

Table of Contents

• Global Options
• Service Options
• Server Options
• Routing Modules
• Listener Options
• Monitor Options
• Filter Options

Global Options

FromDual has the pleasure to announce the release of the new version 2.2.2 of its popular Backup and Recovery Manager for MariaDB and MySQL (brman).

The new FromDual Backup and Recovery Manager can be downloaded from here. The FromDual Repositories were updated. How to install and use the Backup and Recovery Manager is describe in FromDual Backup and Recovery Manager (brman) installation guide.

In the inconceivable case that you find a bug in the FromDual Backup and Recovery Manager please report it to the …

How could the following SQL queries be improved performance wise and otherwise and can you also explain why your change is more optimal?

Please consider, when testing, that your results are not confused by the Query Cache or by reading data from your I/O system which are an order of magnitude faster (Query Cache) or slower (I/O) than the in-memory behaviour.

Table of Contents

• Covering function
• LIKE search
• Covering function twice
• Compare 2 indexed columns
• Function and 2 indexed columns
• Time series problem …

When it comes to SQL Query tuning with customers we often get the slow running SQL query and possibly, in good cases, also the table structure. But very often, for various reasons, we do not get the data.

SQL query tuning on an empty table or a table with only little data is not really fun because either the results of the optimizer have nothing to do with reality or the response times do not really show if your change has improved anything. For example if your query response time before the change was 2 ms …

And this is what the Linux kernel documentation says about it: https://www.kernel.org/doc/Documentation/networking/bonding.txt

Yes, I know, MyISAM is deprecated and unofficially discontinued by the vendors. But we still have from time to time customers using MyISAM and even evangelize for MyISAM…

And to be honest in some cases MyISAM has even advantages (beside some huge disadvantages) over other Storage Engines (simple file copy, footprint, single-query latency, …). But most of our customers are not aware of these advantages and are using MyISAM just because they did it since ever…

One of the biggest problems …

802.3ad bond interface have show high RX dropped packets

I found a god explanation for dropped packages on bonded interfaces: [ 1 ]

This is related to the bonding mode and _not_ a bug. The bonding module will drop duplicate frames received on inactive ports, which is normal behaviour. Overall the packets should be getting into the machine without problems since they are received on the active slave. To confirm this do the following

1) Check dropped packets from all interfaces. So if eth0/eth1 are …

Repositories from your favourite Linux distribution and from your favourite database software vendor get regular package updates. If you do periodic system upgrades (for example every 2 weeks as we do) you get the newest packages of a release series.
Unfortunately recently the software vendors started not only to fix bugs in new releases but also to introduce new features. And when you fix bugs or introduce new stuff new bugs might appear.
To avoid being hit unexpectedly by new bugs you do not want to …